Jade Stone Decorative Coating for Interior & Exterior Walls
JOSME Jade Stone Decorative Coating is an acrylic emulsion with strong weather resistance combined with high purity translucent coloured sand. It is treated using fusing-colloid technology for a crystal clear, warm soft-sheen finish and visual depth of real jade. The solution is suitable for both interior and outdoor surfaces, new constructions and restoration projects and is applied by spray at 2.5-3.5 kg/m2. Colour, finish and packaging can be customised, and samples are available before purchase confirmation.
What Is Jade Stone Decorative Coating?
Jade Stone Decorative Coating is an architectural wall treatment manufactured from high purity translucent coloured sand fused with water-based acrylic resin using the fusing-colloid process. The result is a surface that boasts a rich transparent lustre and tactile warmth, referencing real jade — without the structural burden or cost of full stone covering.
Unlike traditional stone paint which builds texture by layering multi-color speckles, this product employs a refined single-color foundation with full, soft particles. This results in a cleaner, more uniform surface which is more suited for high-end architectural finishes.
It solves the weight restrictions, the expensive real stone cladding and the difficulty of the project of large scale natural stones installation.
Key Product Advantages
Jade-Like gentle Sheen – Warm crystal clear surface with a gentle sheen for luxury and commercial facades.
Interior & Exterior – Offices, hotels, villas, banks, hospitals, government buildings, panels, insulating substrates, shaped columns.
Weather, UV & scratch resistant - Adhesion > 1.5 MPa; hardness 2H–4H.
Anti-Stain - Oleophobic surface. Clean with pH neutral detergent and water.
Matched Topcoat – stops fading, loss of sheen, chalking, cracking.
Low VOC – < 30 g/L. ISO 14001 and China Green Product approved.
Standardised Process – Documented application for repeatable results.
Technical Specifications
| Parameter |
Details |
| Base Material |
High-weather-resistant acrylic emulsion + high-purity transparent colored sand |
| Application Method |
Spray |
| Recommended Consumption |
2.5–3.5 kg/m² |
| Packing Specification |
20 kg per drum |
| Surface Dry Time |
Approx. 2 hours |
| Through-Dry Time |
48 hours |
| Minimum Recoat Interval |
24 hours |
| Ambient Temperature |
5°C to 35°C |
| Relative Humidity |
Below 85% |
| Storage Temperature |
5°C to 35°C |
| Storage Conditions |
Cool and dry place |
| VOC Content |
<30 g/L |
| Adhesion Strength |
>1.5 MPa |
| Surface Hardness |
2H–4H (Pencil Hardness Scale) |
| Scrub Resistance |
5,000+ cycles (ASTM D2486) |
| Accelerated Weathering |
2,000 hours QUV test |
| Color Consistency |
Delta E < 0.5 (spectrophotometry) |
Application Scenarios
Jade Stone Decorative Coating is used across a range of architectural project types:
- Big curving columns & double-height feature walls when solid stone is impracticable Luxury hotels & commercial atriums No grout lines, monolithic finish.
- Residential & wellness high-end — Moisture resistance and warm natural texture great for private spas, baths and interior accent walls.
- Premium retail façades – Scratch resistance and pollutant shedding in temperature cycles for heavy traffic surfaces.
- many types of designs, including Neo-Chinese, European light-luxury, fourth-generation structures, commercial complexes and modern minimalist architecture.
Quality Control
Every production batch of products goes through a structured inspection process before shipment:
- Particle size distribution — Verified for consistent translucency across the batch
- Colour constancy - Measured spectrophotometrically; Delta E must be less than 0.5 between manufacturing runs
- Scrub resistance – Tested to ASTM D2486; minimum 5,000 cycles
- Accelerated weathering — 2000 hours of QUV UV and moisture exposure to confirm colour retention
- Pull-off adhesion (ISO 4624) - Tests the binding strength to the substrate
Batch samples are retained at JOSME's facility to support color, particle size, and performance traceability.
Customization and Ordering
JOSME supports flexible project requirements:
- Custom Colours & Matching
- Particle sizes and wall-finish effects tailored
- Private Label & Custom Formulas
- customised packaging (standard unit: 20kg/drum)
- Physical samples and colour swatches available prior to purchase confirmation
Lead times: Standard products ship within 2–3 working days. Custom-formula, color-match, and private-label orders require 7–15 working days. Large project orders can be scheduled in advance.
FAQ
Q: What does the matched topcoat system do?
A. The special topcoat locks in colour and stabilises the paint film, helping to prevent fading, loss of shine, chalking and cracking when exposed to the elements. The long-term soft-sheen surface finish is preserved.
Q: Can you put it over existing tiles?
A. Yes, if a high-bonding interfacial primer is first used to ensure adherence to the non-porous tile surface.
Q: How do you heal a scratch?
A: The damaged region may be isolated and re-coated and polished to match the original texture. The disadvantage of solid stone cladding is that it leaves no obvious spots after restoration.
Q: What routine maintenance does the surface require?
A: The oleophobic surface is easy to clean. You will need water and a pH-neutral detergent to clean it. Avoid harsh or acidic cleansers that can etch the resin matrix.
Contact Us
For Jade Stone Decorative Coating inquiries, samples, or project support, contact us at [email protected].
