White Water Based Acrylic Paint for Metal — Eco-Friendly, Fast-Drying & Coating
JOSME White Water Based Acrylic Paint is a low-VOC water-based coating used for anti-corrosion and decorating of metal. Produced using acrylic emulsion, environmentally safe anti-rust pigments, useful additives and deionised water. No formaldehyde or benzene included purposefully. For outside steel buildings, fences, road signs, engineering vehicles, agricultural equipment. Dry film thickness: 25 to 35µm per application. With 26 years of coatings knowledge, JOSME enables spray, roller, brush and dip application, a cleaner, safer alternative to solvent-based solutions.
What Is This White Water Based Acrylic Paint?
A water based anti-rust paint that is suitable for light to moderate corrosion situations and provides weather protection, attractive finish and low environmental impact.
Unlike solvent coatings, it thins with clean water, has little or no odour, and avoids solvent fire concerns - perfect for inside staging and outdoor field operations.
The cured film is a strong barrier to air, water vapour, CO₂ and SO₂ and protects metal against rust and oxidation in the outdoors.
Tested to GB/T 9274 (water resistance) and GB/T 1766 (appearance rating) Batch test records available upon request.
Why Choose JOSME's Water-Based Acrylic Anti-Rust Paint?
| Factor |
JOSME Advantage |
| Manufacturing Experience |
26 years in industrial and architectural coatings |
| Eco Compliance |
No formaldehyde, no benzene; low-VOC formula |
| Quality Traceability |
Batch-retained samples; full in-process QC records |
| Flexibility |
Custom colors, private label, custom formulas available |
| Lead Time |
Standard: 2–3 days; Custom: 7–15 days |
| Export Readiness |
Reinforced packaging for ocean freight |
Key Product Features
Low-VOC, Eco-Friendly Formula: VOC emissions far lower than solvent-based choices. Meets environmental criteria for building, infrastructure and industrial finishes.
High Hardness & Adhesion After Curing Bonds securely to prepared metal, resists peeling, scorching and oxidising outside.
Fast Surface Dry: 30-60 minutes (ambient conditions) Shorter recoat intervals increase project productivity and decrease labour expenses.
Water & Weather Resistance: Prevents water penetration and UV deterioration, preserving the look and protection of steel exposed to sun, rain and humidity.
Multi-Method Use: Compatible with spray, roller, brush and dip coating – perfect for production lines and on-site manual applications.
Technical Specifications
| Parameter |
Value / Requirement |
| Composition |
Water-based acrylic emulsion, eco-friendly anti-rust pigments & fillers, functional additives, deionized water |
| Application Methods |
Spray / Roller / Brush / Dip coating |
| Spray Viscosity |
25–30 s (Ford Cup #4, 23 ± 2°C) |
| Dry Film Thickness |
25–35 µm per coat |
| Water Dilution Limit |
≤ 10% of total volume |
| Dipping Time |
20–30 s (adjust for complex geometry) |
| Drying Method |
Ambient temperature or low-temperature baking |
| Surface Preparation |
Sandblast or sand; remove rust, scale, and contaminants; surface must be clean and dry before application |
| Reference Standards |
GB/T 9274 (water resistance), GB/T 1766 (appearance) |
Application Scenarios
Outdoor Steel Infrastructure Steel frames, billboards, road signs, railings that require a clean surface and corrosion protection.
Anti-rust primer for vehicle bodywork and components, for use in engineering and agricultural vehicles, where UV resistance and application efficiency are important.
Dip Coating Lines For fencing, chassis, scaffolding and steel formwork nets. Standard dipping time 20-30 seconds. Extend for intricate forms.
Healthcare, Commercial & Occupied Facilities Low odour, no solvent fumes – safe for hospitals, schools and commercial interiors with no inconvenience.
Surface Preparation & Application Guidelines
Clean to bare metal remove rust, scale, oil, particulates
Ensure completely dry - retained moisture will cause adhesion failure.
Method: Spray for big areas, brush for finer work, dip for batches.
Use delicate wool brushes so you don't leave marks.
Dilute with water max 10% by volume.
Dip time: 20–30 seconds (longer for complicated forms).
Drying: Surface dry in 30-60 minutes. Hard dry in 7-14 days. Ventilation makes it faster.
Quality Control
Multi stage checks: Incoming ingredients (identity, viscosity, purity), in process (viscosity, fineness, pH), final White Water Based Acrylic Paint (hiding power, scrub resistance, freeze-thaw, weathering) Sample batch kept.
Swatches and lab results available before bulk order. ISO 9001 compliant.
Customization & Ordering
Options Custom:
Colour matching to RAL, NCS or customer samples
Packaging for distribution brands – private label
Adaptation of formula to certain corrosion atmospheres or plant
Turn-Around Times:
Standard White Water Based Acrylic Paint: 2-3 business day
Custom colour or formula 7-15 working days
Packing : Export quality drums with strong sealing for ocean freight. Documentation for container loading.
Frequently Asked Questions
Q: What makes this product ecologically friendly?
A: Water-based acrylic emulsion, environment-friendly anti-rust pigment, no additional formaldehyde or benzene. Low odour, water dilutable and VOC much lower than solvent based paints.
Q: What is the mechanism of corrosion protection of the cured film?
A: High density barrier to air, water vapour, CO₂ and SO₂. C2-C3 rated (ISO 12944), tested according to GB/T 9274.
A: Solvent-based paint tends to be more expensive than water-based paint and is less efficient in terms of drying time and environmental impact.
A: Fast dry shortens recoat times and project cycles. Water dilution means no solvent expenditures and less site dangers.
A: The film feels soft because it is not hardened.
A: Surface drying (30-60 min) is different from complete coalescence. Full hardness of acrylic films is achieved in 7-14 days. High humidity or lack of ventilation makes this longer.
Q. Will it go over existing oil based paint?
A: Yes, using mechanical sanding and a high adhesion transitional primer first to prevent adhesion failure.
Contact Us
Ready to request samples or discuss your White Water Based Acrylic Paint project? Email [email protected] — we reply within 1–2 business hours.
